Object 61 "Construction Aid Ellipse Sector" (Entities) Changed in Version 2021.0 |
www.CAD6.com |
Data Block SequenceData Block 003( cx, cy ) - Center-point Data Block 006( vx1, vy1 ) - Vector end-point 1 Data Block 006( vx2, vy2 ) - Vector end-point 2 Data Block 005( ax1, ay1 ) - Start-angle definition Data Block 005( ax2, ay2 ) - End-angle definition Data Block 101( Orientation ) - Arc direction
The point (cx,cy) determines the ellipse's center-point, the points (vx1,vy1) and (vx2,vy2) are end-points of vectors that define the ellipse. The points (ax1,ay1) and (ax2,ay2), in relation to the ellipse's center-point (cx,cy), determine the start- and end-angle of the sector. If Orientation >= 0, the sector is drawn counter-clockwise from the start-angle to the end-angle. If Orientation < 0, the sector is drawn clockwise.
Construction Aid objects will usually not be output to printer or clipboard. Although a Construction Aid ellipse sector is by definition a "closed" object, it will never be filled.
Attributes New in Version 2021.0A Construction Aid ellipse sector may contain attribute data blocks (see MKI_BLOCK_ATTRIBUTE) of types "local", "outline", and "point". Their position in the list of data blocks must be as follows:
The total number of attributes of each type (local, outline, point) per respective element (entity, outline, and point) is limited to MKI_ATTRIBS_PER_OBJECT.
Interface Command SequenceMKI_ObjectOpen, Type = MKI_OBJ_GEOESECTOR MKI_ObjectAddPoint, Type = MKI_DB_POINT_CENTER MKI_ObjectAddPoint, Type = MKI_DB_POINT_VECTOR MKI_ObjectAddPoint, Type = MKI_DB_POINT_VECTOR MKI_ObjectAddPoint, Type = MKI_DB_POINT_ANGLE MKI_ObjectAddPoint, Type = MKI_DB_POINT_ANGLE
Use the MKI_PARSE_OBJ_EARC class to parse the data blocks of such an object in memory.
|
CAD6interface 2024.2 - Copyright 2024 Malz++Kassner® GmbH